DIY Wine Cork Pencil Holder
A super fun and easy DIY project to endeavour out, this amazing wine cork pencil holder is perfect for students, business professionals or anyone who likes to pigment or depict that can never take too many holders for storing brushes and pencils.
This adorable wine cork pencil holder is so unproblematic to brand only has and then much personality. This is a peachy alternative to merely purchasing a pencil holder because it is handmade and carefully crafted with love. Best yet, yous probably have most if non all of these materials laying effectually your house, and then this project will not cost y'all much money at all. This is especially nifty for anyone looking to find a nowadays on a upkeep.
Materials you'll need for Wine Cork Pencil Holder:
- Tin
- vino cork
- cream and green acrylic paint
- scissors
- rope
- lace ribbon
- paper
- cardboard
- flower pigsty dial
- paint castor
- pencil
- arm saw
- gum gun
- ruler
How to make the Wine Cork Pencil Holder:
Footstep 1: Prepping the Corks
To prep your corks, all you lot really need is the ruler and a pencil. Yous are going to want to make sure you measure your cork at the precis length so you can cut it right in the centre of the cork. The terminal thing you want is a pencil holder full of mismatching cork lengths, then precision is of import here.
Equally you're measuring the corks, make a little pencil mark correct at the center bespeak so y'all know where exactly to cut when you're ready.
Pace ii: Cutting the Corks
Now that all of your corks are measured and marked, you tin can beginning to cutting. Using your very abrupt knife, cut the cork perfectly in one-half so y'all take two perfectly measured sides.
It's ok if your cork has some cork residual or dust come up off of it. That won't matter one time y'all have information technology glued on to your actual pencil holder.
Step three: Painting
Now that all your corks are perfectly halved, information technology's time to paint! Using your crème colored acrylic paint, pigment each cork half very carefully, making sure you get all sides and crevices. Yous also want to make sure you are letting areas of your cork dry before treatment it wet to prevent any fingerprints getting into the paint.
Footstep 4: Using the Blossom Hole Punch
Once all your cork halves are perfectly painted, yous can starting time to piece of work on the embellishments. Using your blossom hole punch, cutting out a flower stencil in club to employ information technology on your cork halves. This stencil will exist painted in after each of the cork heads in order to showcase a gorgeous, delicate little bloom blueprint on all of your corks.
Cut your bloom stencil out the smallest possible so you get a good contact from the stencil to the cork half. This will also go far easier to pigment in later on.
Stride 5: Painting the Stencil
Securing your stencil in identify with your fingers, carefully paint in the stencil with your crème acrylic paint. Exist careful about getting any paint under the stencil as this will ruin your design. Pressing downward on your stencil tightly should help secure a seal and prevent any extra paint from sliding under the stencil.
Step half-dozen: Gluing On Your Corks
Now that all of your corks are painted and some have the blossom design on it, you lot are ready to start gluing your corks to your can. Start past gluing from the lesser up so you can run across how the pattern is turning out equally you lot become.
You lot but need a small dab of hot gum in society for your cork to stick, so you don't accept to utilise much at all. If you employ too much hot glue, the glue will seep out from the sides and it will be difficult to remove afterward on.
Once yous become your bottom row washed, yous can start on the 2nd row, and you lot continue this process until you get to the acme.
The top row of the tin can is reserved for your flower design corks, so identify one cork with the flower design next to a regular painted cork, and then on.
Your can should look like this past the finish of your gluing process.
Step 7: Gluing on the Decorative String
Once all your corks are glued on, yous tin measure out, cut and glue your decorative cord to add some texture to the elevation of the can. This will bring in an extra level of artistry and help make your whole pencil holder projection pop.
Also using hot mucilage, glue your perfectly measured cord on to the elevation of the can so you lot have an even cord all the way around.
Step 8: Adding the Decorative Ribbon
After your cord is glued on, you can add together your decorative ribbon to add even more than embellishments.
All you really need to exercise hither is necktie a delicate small bow, notice the heart of your cork pencil holder can, and glue information technology firmly on with a little dab of hot glue.
When gluing on your bow, make sure to use a small dab of hot glue to prevent any excess glue from getting onto your painted cork.
Press the pocket-size bow firmly in place, but likewise exist conscientious to non burn your fingers in the process. They don't call it hot glue for nothing!
Your last product should wait exactly like this.
<
And you're done! See how easy and fun that was? Y'all tin can easily requite this vino cork pencil holder as a gift to pretty much anyone on your listing since information technology'due south e'er swell to accept extra storage areas around the house. This wine cork pencil holder can hold so much more than just pencils, after all. Anyone can employ this for minor tools, paintbrushes, role supplies, etc. It's a very cute and easy gift to give to someone, or yous can just keep information technology for yourself since it'southward easy to make and adorable to look at. Either way, this pencil holder is special because information technology is fabricated from the middle and took time to go done.
Source: https://www.diys.com/wine-cork-pencil-holder/
0 Response to "DIY Wine Cork Pencil Holder"
إرسال تعليق